Husky coats have a tough outer guard hair and a thick, soft undercoat underneath. Managing this heavy fur comes down to choosing between bladed deshedding edges, wide-spaced wire pins, or straight rake teeth that slide past the top layer.
Best overall: FURminator Undercoat Tool clears loose undercoat on dogs over 50 pounds with a push-button release.
Best for a first-time buyer: Pecute Self-Cleaning Brush uses massage-tipped pins and a one-click cleaning button that keeps fur removal simple.
Best for heavy, everyday use: Maxpower Planet Grooming Rake provides nine teeth for tough mats and seventeen teeth for thinning undercoat.
The rest of this guide helps owners match specific brush shapes to their pet’s shedding patterns.
Our Picks
| # | Product | ||
|---|---|---|---|
| 1 |  |
FURminator Undercoat Tool
Best Overall
|
Check Price |
| 2 |  |
Aumuca Undercoat Rake
Best for Double Coats
|
Check Price |
| 3 |  |
Pecute Self-Cleaning Brush
Easiest to Clean
|
Check Price |
| 4 |  |
Maxpower Planet Grooming Rake
Best Dual-Sided Rake
|
Check Price |
| 5 |  |
RYAN’S Paw Brothers Slicker Brush
Best for Long Hair
|
Check Price |
| 6 |  |
oneisall Grooming Vacuum
Best Vacuum Attachment
|
Check Price |
| 7 |  |
FURminator Grooming Rake
Best Rotating Teeth
|
Check Price |
| 8 |  |
DOGI Undercoat Rake
Best Double Row Rake
|
Check Price |
Top 8 Dog Brushes For Shedding Husky
1. FURminator Large Dog Undercoat deShedding Tool
Best for: Owners of large dogs over 50 lbs.
This grooming tool is built specifically for large dogs with long coats. The stainless steel edge reaches straight through the topcoat to grab dead undercoat fur without cutting skin or harming outer hair when you follow directions. An ergonomic handle gives you a firm grip during long sessions, while the FURejector button instantly pushes trapped fur off the teeth.
Because this tool is tailored strictly for pets over 50 pounds, it isn’t built for small breeds or short-haired pets. The tight spacing of the metal teeth targets loose fur rather than clearing out large, knotted tangles. If your dog gets solid mats behind the legs, you’ll need to detangle those sections before running this tool through the coat.
Pros:
– Clears undercoat without scratching skin
– Quick-cleaning button sheds trapped hair
– Sturdy grip offers good control
Cons:
– Only fits dogs over 50 pounds
– Not made to cut thick mats
2. Aumuca Undercoat Rake
Best for: Gentle dematting on sensitive skin areas.
The single row of rounded metal teeth on this rake lets you lift dead fur without dragging too much coat at once. It weighs only 1.5 ounces and carries a compact 2.2-inch head that easily maneuvers around ears, chests, and legs. Those smooth rounded tips protect delicate skin while breaking apart light knots on dogs, cats, or even horses.
The narrow 2.2-inch comb head means grooming a giant dog takes multiple passes across the body. If you want to groom a broad back in just two quick swipes, this smaller head isn’t designed for that kind of fast coverage. It excels at controlled detangling rather than gathering giant piles of fur in a single motion.
Pros:
– Single row creates very little drag
– Rounded tips protect pet skin
– Snap-on cover keeps metal safe
Cons:
– Small head takes longer on backs
3. Pecute Skin Friendly Self-Cleaning Slicker Brush
Best for: Pets that dread daily grooming sessions.
Fine stainless steel wires bent at a 135-degree angle help this slicker brush glide through double coats to collect loose hair, dander, and dirt. Each wire pin is capped with a small protective massage particle to keep the metal from scratching bare skin, which helps calm nervous animals. At just 3.1 ounces, the non-slip TPR handle stops hand fatigue during repeated weekly brushings.
The manufacturer points out this tool isn’t suitable for tightly curly coats like Poodles. The quick-cleaning button ejects trapped fur so you can wipe it away effortlessly.
Pros:
– Button drops collected fur instantly
– Massage tips prevent skin scrapes
– Extremely light build reduces fatigue
Cons:
– Unsuitable for tight curly coats
4. Maxpower Planet Dog Grooming Rake
Best for: Clearing out tough mats and knots.
This dual-sided rake solves two grooming problems with one solid tool. One side features nine rounded teeth spaced out to slice through stubborn mats and tangles, while the other side carries seventeen teeth to thin and pull out dead undercoat. The inner curve of each tooth is sharpened to work through tangles safely without scratching the pet’s skin.
Pulling a dual-sided metal rake requires a steady hand, as moving too quickly through dense knots could pull on the dog’s skin. It works best when you take slow, deliberate strokes through the thickest parts of the fur.
Pros:
– Two sides handle mats and thinning
– Curved teeth prevent direct scratches
– Rubberized handle stays firmly put
Cons:
– Requires careful handling around tangles
5. RYAN’S Paw Brothers Slicker Brush
Best for: Deep coats needing extra pin reach.
Featuring extra-long one-inch pins, this slicker brush is engineered to dig straight to the base of thick double coats. The stainless steel pins pull out hidden dirt, debris, and trapped fur that shorter brushes leave behind. Its flat head measures 4.5 by 3 inches, giving you plenty of surface area to work through dense patches behind the legs and tail.
Pros:
– Deep one-inch pins reach undercoats
– Large head covers broad areas
– Long-standing brand built for groomers
Cons:
- Pins measure 1in length, which anyone grooming short coats must work around carefully.
6. oneisall Dog Hair Vacuum Shedding Grooming Brush Kits
Best for: Keeping shed hair off the floor.
This grooming machine combines an undercoat brush directly with a quiet 60-decibel suction motor to trap 99% of loose hair before it flies into the room. It features three adjustable suction levels along with an upgraded grooming brush that uses safe metal points to lift undercoat hair easily. A large 1.5-liter dust canister holds plenty of thick fur so you don’t have to empty it constantly.
Pros:
– Captures loose hair inside canister
– Quiet motor operates at 60dB
– Large tank reduces emptying trips
Cons:
– Bulkier to store than rakes
7. FURminator Grooming Rake Tool
Best for: Smooth gliding through dense fur.
The defining feature of this undercoat rake is its row of rotating metal teeth. As you pull the rake across the dog’s coat, the pins spin inside the base, which allows them to slide past heavy knots rather than snagging and pulling on the skin. It works as a convenient daily tool designed especially for dogs and cats with thick fur or dense double coats.
It isn’t meant for cutting apart hard, felted mats that need sharp dematting blades. Instead, it acts as an easy-pull daily maintenance rake that keeps normal double coats tidy and tangle-free.
Pros:
– Rotating teeth reduce coat pulling
– Ergonomic non-slip handle adds control
– Built specifically for dense fur
Cons:
– Can’t cut through solid mats
8. DOGI Undercoat Rake
Best for: Thick undercoats needing heavy thinning.
Built with a double row of steel pins, this wide rake is designed to lift out large amounts of loose undercoat while minimizing harsh coat pulling. The manufacturer states that its design reduces shedding by up to 90% after just one short session, easily outperforming standard flat combs. A durable handle made from non-toxic silicone provides a steady, comfortable grip during heavy seasonal shedding.
You’ll also spend time manually clearing fur clumps from between the two rows of pins as you work.
Also Worth Considering
- Pat Your Pet Deshedding Brush: This dual-purpose tool pairs a multi-tooth deshedding head with an extra metal grooming comb to help finish your dog’s topcoat after thinning the undercoat.
- Twellife Dog Rake: Featuring a wide undercoat rake paired with a steel comb, this set gives owners a simple two-piece mechanical package for untangling long fur without plastic mechanisms.
- GoPets 2-in-1 Comb Grooming Brush: Combining dematting blades and a thinning rake on a single head, this unit lets owners switch between breaking stubborn knots and clearing loose seasonal fuzz.
Where These Overlap
The Aumuca Undercoat Rake, FURminator Grooming Rake, and DOGI Undercoat Rake all share a similar rake-style frame with blunt, rounded steel pins. They all aim to slide under the guard hairs to gather dead undercoat without slicing into the skin. Choosing between them comes down to tooth design: Aumuca uses a single row of stationary pins for low pull, FURminator uses rotating pins to slide through snags, and DOGI uses two parallel rows to gather more fur at once. If your dog has a standard double coat without mats, any of these three will handle basic undercoat maintenance similarly.
How We Picked
We compared listed pin lengths, metal blade shapes, self-cleaning buttons, and handle materials stated directly on each product page. We also evaluated whether tools included specific safety measures like rounded teeth or protective tips. This guide relies strictly on the claims, measurements, and features printed on each seller’s listing, comparing products solely on their own listed specs rather than lab trials.
Still Not Sure?
How often will I actually brush my husky?
If you only groom once a week or during heavy seasonal coat blowouts, a tool with deep clearing power like the Maxpower Planet Grooming Rake is ideal. Its dual-sided head lets you tackle neglected tangles first before clearing out dead undercoat with the finer side.
Will dog hair flying around the room drive me crazy?
If cleaning up loose, drifting fur off your clothes and living room rug sounds frustrating, standard wire brushes will leave hair behind. In that case, look at the oneisall Grooming Vacuum, which uses direct suction to swallow loose hair while you brush.
What should I buy to avoid hurting sensitive skin?
If you worry about scratching your pet or pressing down too hard, steer clear of bare steel teeth without caps. The Pecute Self-Cleaning Brush suits sensitive pets because each wire pin features a protective massage particle to prevent scratching.
The FURminator Undercoat Tool remains our top choice for clearing dead undercoat on large dogs, while the Maxpower Planet Grooming Rake stands out for heavy dematting duty. Check your dog’s coat today to pick the right style of teeth for their fur.
Frequently Asked Questions
How do I clean the fur out of these brushes?
Cleaning methods depend on the specific tool’s design. The Pecute Self-Cleaning Brush uses an instant hair-ejection button so loose fur drops away effortlessly. For standard metal rakes like the FURminator Grooming Rake, you must pull trapped fur bunches from the teeth using your fingers.
Will an undercoat rake cut my dog’s outer coat?
Standard rakes with blunt pins don’t cut topcoat hair when used properly. However, dematting tools like the Maxpower Planet Grooming Rake feature sharpened inner curves made to cut through stubborn knots. Keep the teeth angled properly against the fur to avoid pulling or cutting healthy guard hair.
Is a simple slicker brush enough for a husky blowout?
A basic slicker brush like the RYAN’S Paw Brothers Slicker Brush works great for surface fur, but it may struggle with deep seasonal blowouts. Huskies produce an extremely dense undercoat that often requires the wide, deep teeth of a dedicated rake to reach down to the skin level.
Conclusion
Managing a shedding husky requires a tool that can reach past the topcoat to clear loose undercoat fur safely. Match your choice to your pet’s needs, whether you need deep dematting teeth, protective massage tips, or integrated vacuum suction. Regular grooming with the right tool keeps your dog comfortable and cuts down on loose fur throughout the home.